Think Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side Menu


Installation Guide For Windows 95
Fig. 1



Once the network card is installed you will boot
your computer . A dialog box will popup and
tell you that there is a new device found. After
that message diapears the 'Add New Hardware
Wizard' appears. Click the next button to continue.
Refer to Fig. 1

Fig. 2



The Hardware wizard will then ask you for the
driver location of your network card.The default
window has the 'Floppy disk drives' checked.
This is the default setting. You will need to
insert your driver disk and check the 'Specify
a location' box and type in 'A:\win95' Then
click the 'Next' button. Refer to Fig.2

Fig. 3



The Hardware wizard will then check the disk
and give you a Dialog box that look like Fig. 3.
This is the correct driver for your network card
then Click the 'Next' button to install the driver.

NOTE: If this did not work and your Dialog box
does not look like this you will need to go use
the 'Back" button and click 'Browse'. and select
the Win95 folder manually.

Fig.4

 

Once the driver has been installed you will get a
dialog box like Fig. 4. Then click the 'Finish' button
and your computer will give you your desktop.
You will then need to configure the network card
to access your network.