|  ViPoR iSCSI XL Storage System  |  ViPoRSS-8U  |  ViPoRSS-5U  | ViPoR SSR-212  |


Think ViPoR™ SSR-212/Open-E NAS Solution
A Flexible and High Performance Hardware Platform for DAS, NAS and SAN

Build a flexible foundation for your businesses, whether it's small or enterprise. Couple the Intel Storage Server SSR212MC2 with one of a number of different industry software solutions to create an application server with internal storage (DAS) or as a dedicated network storage appliance (NAS or SAN).

Get performance and flexibility with a storage server built to support quad-core and dual-core. The SSR212MC2 is a 2u rack mount storage system that supports 12 enterprise-class Serial Attached SCSI (SAS) or high-capacity Serial ATA (SATA) HDDs. Flexible network connectivity includes Ethernet, Fibre Channel or Infiniband via add-in cards.




Specifications

Raw Storage Capacity Data Drive Bays Processor Memory Capacity Memory Type HDD DIMM Slots Enclosure Controller Client Connectivity Front Panel Back Panel Input/Output PCI USB Serial Ports Video Port LAN Port Other Chassis Form Factor Height Width Depth Weight Color Rack Support System Cooling Fans Power Configuration Environment Ambient Relative Humidity Acoustics Electrostatic Discharge

Expandable to 9.0 TB – using twelve 750 GB (7.2k RPM) SATA drives Expandable to 3.6 TB – using twelve 300 GB (15k RPM) SAS drives 12 Serial Attached SCSI (SAS) or Serial ATA (SATA) Hot Pluggable 5100 series (dual core) Intel® Xeon® processor, 1066 MHz FSB with 4MB of L2 cache 8 slots, expandable to 32GB maximum Fully buffered DIMM technology (FBDIMM) memory. DDR2-533 and DDR2-677 FBDIMMs 3.5" SAS or SATA for the twelve data drives, or up to two optional 2.5" SAS or SATA boot drives (internally mounted) Eight 240-pin FBDIMM sockets On-board Vitesse VSC410 micro-controller Client connectivity via Internet Protocol Small Computer System Interface (iSCSI) Dual Gb/s Ethernet Buttons and LEDs Power button, Reset button, ID button, Power LED, Fault LED, ID LED I/O connectors 1x 5-pin Mini USB Buttons NMI button, ID button Power receptacle 1x IEC AC per installed power supply module SSR212MC2R: One PCI Express* (PCIe) x8 slot, two PCIe x4 slots, one PCI-X slot SSR212MC2: Two PCIe x8 slots, two PCIe x4 slots, two PCI-X slots Four USB 2.0-compatible connectors (rear) One DB9 9-pin connector (rear) One standard VGA-compatible 15-pin connector (rear) Two 10/100/1000 MB RJ-45 (rear) One stacked PS2 Mouse/Keyboard (rear) 2U rackmount chassis , supports low-profile PCI add-in cards only 87.9 mm, 3.46 in. 447 mm, 17.6 in. (across body of chassis) 707 mm, 27.83 in. (from rack posts to max extremity of chassis) As shipped (zero drives): approximately 20 kg, 44 lbs. Fully configured (12 drives): approximately 30 kg, 66 lbs. Shipping container: 3.2 kg, 7 lbs. Black plastic, silver sheet metal Rail mount, compatible with four-post rackmount only Chassis includes ten hot-swappable redundant system fans for cooling the hard drives, baseboard and SAS Host Bus Adapter (HBA) card 850 W continuous, 1+1 redundant power supplies. Intel® Storage Server SSR212MC2 ships with one 850 W power supply Temperature Operating (system): 10°C to 35°C, with maximum change not to exceed 10°C per hour; non-operating (system): -40°C to 70°C Non-operating: 90% at 35°C non-condensing < 7.0 BA (rackmount) in an idle state in a normal office environment (23°C) 15 KV per Intel test specification Safety Compliance

For additional information, options and pricing about our ThinkCP™ products, please contact our sales representatives - (800)726-2477 or email - SalesDesk AT ThinkCP.com Copyright © 1997 - 2011 H. Co. Computer Products. All Rights Reserved. ThinkCP™ and H. Co. Computer Products® are trademarks or registered trademarks of H. Co. Computer Products, Inc. For additional information regarding our trademarks, please visit Trademark Info at http://www.ThinkCP.com. This list is not intended to be an all-inclusive or comprehensive list of all H. Co. Computer Products trademarks and/or intellectual properties. Other product names used herein are for identification purposes only and may be the respective property or trademarks of other companies.