Think Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side Menu


| 10G-Extreme SAN Main  |  ViPoR 8XQ 2U  |  ViPoR 8XQ 4U  |  ViPoR 16XQ 5U  |


Think ViPoR Storage 10G-Extreme SAN - Model 8XQ 2U
Motherboard Specifications




Physical Stats
Form Factor
• Extended ATX
Dimensions
• 12" x 13.05" (30.5cm x 33.2cm)

Processor/Chipset
CPU
• Dual 1207-pin Socket F
• Support up to two Quad-Core / Dual-Core   AMD Opteron™ 2000 Series (Socket F)   processor(s)
System Bus
• 1000MHz HyperTransport
Chipset
• nVidia MCP55 Pro
• NEC uPD720400


System Memory
Memory Capacity
• Sixteen 240-pin DIMM sockets
• Support up to 64 GB DDR2 667/533/400   MHz memory
• For Single CPU: Memory must be   populated in CPU1 DIMMs only
• For Dual CPUs: Recommended that   memory be populated equally in adjacent   memory banks
• Dual channel memory bus
Memory Type
• DDR2 667/533/400 MHz ECC, registered   SDRAM 72-bit, 240-pin gold-plated   DIMMs
DIMM Sizes
• 256 MB, 512 MB, 1GB, 2GB, 4GB
Memory Voltage
• 1.8V only

On-Board Devices

SATA
• nVidia MCP55 Pro SATA2 3.0Gbps
  Controller
• 6 SATA Ports
• nVidia RAID 2.0
• SATA RAID 0, 1, 0+1, 5, JBOD Support
IPMI
• Support for Intelligent Platform   Management Interface v.2.0
• 200-pin IPMI slot
• (Optional: AOC-SIMLC(+) R 3.00)
• (Optional: AOC-SIM1U(+) R 3.00)
• RMM (Remote Management Module)
• (Card not included)
Network Controllers
• nVidia MCP55 Pro Chipset Dual-port
  LAN / Ethernet Controller
• Supports 10BASE-T, 100BASE-TX,
  and 1000BASE-T, RJ45 output
VGA
• ATI ES1000 Graphics Controller
Super I/O
• Winbond 83627HF

Input / Output
SATA
• 6 SATA2 ports
IDE
• Single EIDE channel support up to two
• Supports UDMA Mode 5
• Supports PIO Mode 4
• Supports ATA 100/133
Floppy
• 1 Floppy port; 1.44 MB support
LAN
• 2 RJ45 LAN ports
USB

• FUCI
• Up to 6 USB Ports 2.0 Compliant,
  1.1 Compatible
• 2 Rear Ports
• 4 Internal Headers
VGA
• 1 VGA port
Keyboard / Mouse
• PS/2 keyboard and mouse ports
Serial Ports
• 1 Fast UART 16550 serial port
• 1 serial port header


Expansion Slots
PCI-Express
• 2 x8 PCI-e slots
• 1 SEPC (Supermicro extended Power   Connector) slot for 2U active riser cards
  w/ a power extension
  (i.e. CSE-RR2UE-AX)
PCI-X
• 2 64-bit 133/100MHz PCI-X (3.3V) slots
• 2 64-bit 100MHz PCI-X (3.3V) slot
IPMI

• IPMI 2.0 expansion slot
Important Chassis Notes
• To ensure system stability, a 550W   (minimum) ATX power supply
  [ 4-pin (+12V), 8-pin (+12V) and
  24-pin are required]

System BIOS
BIOS Type
• 8Mb Flash EEPROM with AMI® BIOS
BIOS Features

• Plug and Play (PnP)
• DMI 2.3
• PCI 2.2
• ACPI 2.0
• BIOS Rescue Hot Keys
• USB Keyboard Support
• Hardware BIOS Virus Protection
• SMBIOS 2.3

Management
Software
• Optional IPMI (Intelligent Platform   Management Interface) 2.0
• Super Doctor III
• Watch Dog
Power Configurations
• ACPI Power Management
• Wake-On-Ring (WOR) headert
• Wake-On-LAN (WOL) header
• Keyboard Wakeup from Soft-Off
• Power-on mode control for AC power
  loss recovery
• Internal/External modem remote ring-on

PC Health Monitoring
CPU
• Monitors CPU Core Voltages, +1.5V,   +3.3V, +5V, ±12V, 5V Standby,   HyperTransport Link voltage 1.2V,
  memory voltage 1.8V, VBAT
• CPU switching voltage regulator
FAN
• Up to 8-fan status tachometer monitoring
• Up to six 3-pin & two 4-pin fan headers
• Status monitor for speed control
• Stauts monitor for on/off control
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan   connectors
Temperature
• Monitoring for CPU and chassis   environment
• CPU Thermal Trip Support
• Thermal Control for 8x Fan Connectors
• I2C Temperature Sensing Logic
LED
• CPU / System Overheat LED
• Suspend-State Indicator LED
• +5V Standby Alert LED
Other Features
• Chassis Intrusion Detection
• Chassis Intrusion Header

Operating Environment / Compliance
RoHS
RoHS 5/6
Environmental Specifications
• RoHS Compliant 5/6, Server Exemption
• Operating Temperature:
  10°C to 35°C (50°F to 95°F)
• Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity:
  8% to 90% (non-condensing)
• Non-operating Relative Humidity:
  5% to 95% (non-condensing)
Regulatory
• Passed to meet FCC
  standard requirement


For additional information, options and pricing about our ThinkCP™ products, please contact our sales representatives -
(800)726-2477 or email - SalesDesk AT ThinkCP.com



Copyright © 1997 - 2011 H. Co. Computer Products. All Rights Reserved. ThinkCP™ and H. Co. Computer Products® are trademarks or registered trademarks of H. Co. Computer Products, Inc. For additional information regarding our trademarks, please visit Trademark Info at http://www.ThinkCP.com. This list is not intended to be an all-inclusive or comprehensive list of all H. Co. Computer Products trademarks and/or intellectual properties. Other product names used herein are for identification purposes only and may be the respective property or trademarks of other companies.