ThinkTankI - 6015 1U Twin Server

ThinkTankI - 6015 1U Twin Server Key Features:
Two systems (nodes) in a 1U form factor. Each node supports the following:
•  Quad & Dual Core Intel® 64-bit Xeon®
    Support 1066 / 1333 / 1600 MHz FSB
•  Up to 64GB DDR2 800/667/533 SDRAM
    Fully Buffered DIMM (FB-DIMM)
•  1 (x16) PCI-Express Generation II
•  2x Intel® (ESB2/Gilgal) 82563EB
    Dual-port Gigabit Ethernet Controller
•  2x Hot-swap SATA Drive Bays
•  980W High-efficiency
    Power Supply

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Quad-Core Xeon 5400 1U Twin Key Features: •   Dual Intel® 64-bit Xeon® Quad-Core or     Dual-Core, with 1600 / 1333 / 1066          MHz FSB •   Intel® 5400 (Seaburg) Chipset •   Up to 64GB DDR2 800* / 667 / 533     SDRAM Fully Buffered DIMM     (FB-DIMM) •   Intel® (ESB2/Gilgal) 82563EB     Dual-port Gigabit Ethernet Controller •   4x SATA 3.0Gbps Ports via ESB2     Controller •   1 (x16) PCI-Express Generation II •   ATI ES1000 Graphics with     32 MB video memory •   SIMSO IPMI 2.0 Slot

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Server Specifications

Processor/Cache CPU • Dual 771-pin LGA Sockets • Supports up to two Intel® 64-bit   Xeon® processor(s) of the same   type below:    • Quad-Core Intel®      Xeon®Processor 5300      5400/5300 sequence      (Harpertown/Clovertown      processor) up to 3.16 GHz    • Dual-Core Intel®      Xeon®Processor 5200/5100      sequence (Wolfdale/Woodcrest      processor) up to 3.40 GHz System Bus • 1600 / 1333 / 1066 MHz system    bus System Memory Memory Capacity • Eight 240-pin DIMM sockets • Supports up to 64 GB 800 / 667 /   533MHz DDR2 ECC FB-DIMM   memory • Dual branch memory bus • Memory must be populated in pairs • Memory Sparing supported Memory Type • 800 / 667 / 533MHz FB-DIMM   (Fully Buffered DIMM) ECC DDR2   SDRAM 72-bit, 240-pin gold-plated   DIMMs DIMM Sizes • 512 MB, 1GB, 2GB, 4GB, 8GB** Memory Voltage • 1.8 V or 1.5 V Error Detection • Corrects single-bit errors • Detects double-bit errors   (using ECC memory) • Supports Intel® x4 and x8 Single   Device Data Correction (SDDC) On-Board Devices Chipset • Intel® 5400 (Seaburg) chipset • ESB2 SATA • Intel ESB2 SATA 3.0Gbps   Controller • RAID 0, 1, 5, 10 support   (Windows only) • RAID 0, 1, 10 support   (Linux) IPMI • Support for Intelligent Platform   Management Interface v.2.0, v.1.5 • 200-pin IPMI slot (SIMSO(+)) • (Optional: AOC-SIMSO(+)) Network Controllers • 2Intel® (ESB2/Gilgal) 82563EB   Dual-Port Gigabit Ethernet   Controller • Supports 10BASE-T, 100BASE-TX,   and 1000BASE-T, RJ45 output • Intel® I/OAT support for fast,   scaleable, and reliable networking Graphics • ATI ES1000 controller with   32 MB of video memory Super I/O • Winbond 83627HF chip Clock Generator • CK410B chip Chassis Form Factor • 1U Rackmount Model • SC808T-980B Dimensions Height • 1.7" (43mm) Width • 17.2" (437mm)

Dimensions (Continued) Depth • 27.75" (705mm) Gross Weight • 40 lbs (18.1kg) Available Colors • Black Front Panel (per Node) Buttons • Power On/Off button • System Reset button LEDs • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED   Expansion Slots (per Node) PCI-Express • 1 (x16) PCI-e Generation II slot   Drive Bays (per Node) Hot-swap • 2x 3.5" SATA Hot-swap drive bays   SATA Backplane 1U SATA Backplane   System Cooling Fans • 6x Cooling Fans   Power Supply 980W AC-DC power supply w/ PFC AC Voltage • 100 - 240V, 60-50Hz, 14-6 Amp +5V standby • 4 Amp +12V • 81 Amp   Management Software • Optional IPMI   (Intelligent Platform Management   Interface) 1.5 / 2.0 • Super Doctor III • Watch Dog • NMI Power Configurations • ACPI Power Management • Main Switch Override Mechanism • Wake-On-Ring (WOR) header • Wake-On-LAN (WOL) header • Power-on mode for AC power recovery • Internal / External modem remote ring-on   PC Health Monitoring CPU • Monitors for CPU Cores,+1.5V, +3.3V,   +5V, ±12V, +3.3V Stdby, +5 Stdby,    VBAT, HT, Memory, Chipset • 6-Phase-switching voltage regulator   with auto-sense from 0.8375V-1.60V FAN • Total of four proprietary fan headers   supporting up to 8 fans • 8x fans with tachometer status monitoring • Status monitor for speed control Temperature • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support • PECI LED • CPU / System Overheat LED Other Features • Chassis intrusion detection • Chassis intrusion header   Operating Environment / Compliance RoHS • RoHS Compliant 5/6, Server Exemption Environmental Spec. • Operating Temperature:   10° to 35°C (50° to 95°F) • Non-operating Temperature:   -40° to 70°C (-40° to 158°F) • Operating Relative Humidity:    8% to 90% (non-condensing) • Non-operating Relative Humidity:   5 to 95% (non-condensing)

For additional information, options and pricing about our ThinkCP™ products,
please contact our sales representatives - (800)726-2477 or email -
SalesDesk AT ThinkCP.com


Copyright © 1997 - 2008 H. Co. Computer Products. All Rights Reserved. ThinkCP™ and H. Co. Computer Products™ are trademarks or registered trademarks of H. Co. Computer Products, Inc. For additional information regarding our trademarks, please visit Trademark Info at http://www.ThinkCP.com. This list is not intended to be an all-inclusive or comprehensive list of all H. Co. Computer Products trademarks and/or intellectual properties. Other product names used herein are for identification purposes only and may be the respective property or trademarks of other companies.