 |
ShAir™
Bridge Outdoor Antenna Kit
The MILAN MIL-AO15-P08 connects to
MILAN’s ShAir Bridge™ or ShAir AccessG™
wireless access points to extend the range of coverage for
the wireless network.
The MILAN MIL-AO15-P08 antenna provides extended coverage
for an existing 802.11b wireless local area network (WLAN).
The MILAN MIL-AO15-P08 comes with a conversion cable that
allows connection directly to a variety of wireless devices
such as MILAN’s ShAir Bridge™ or ShAir AccessG™
wireless access points.
The MILAN MIL-AO15-P08 requires an access point or wireless
broadband gateways with a reverse SMA connector. The MILAN
MIL-AO15-P08 includes a conversion cable that allows connection
directly to the supported MILAN wireless access points and
routers.
Features
• 2.4GHz Frequency Range for 802.11 b/g Wireless Applications
• Omni-Directional, Best for Point to Multi-Point Bridging
• Made From Water Proof Material for Outdoor Applications
|
Product
Number
1) MIL-AO15-P08
|
Description
Pole-mount Omni Directional 8dBi gain - Beam Width H360 V15 |
 |
ShAir™
Bridge Outdoor Antenna Kit
The MILAN MIL-AS15-F18 connects to
MILAN’s ShAir Bridge™ or ShAir AccessG™
wireless access points to extend the range of coverage for
the wireless network.
The MILAN MIL-AS15-F18 antenna provides extended coverage
for an existing 802.11b wireless local area network (WLAN).
The MILAN MIL-AS15-F18 comes with a conversion cable that
allows connection directly to a variety of wireless devices
such as MILAN’s ShAir Bridge™ or ShAir AccessG™
wireless access points.
This product includes the following items: Mounting Kit, Lightning
Surge Protector and Conversion Cable.
The MILAN MIL-AS15-F18 requires an access point or wireless
broadband gateways with a reverse SMA connector. The MILAN
MIL-AS15-F18 includes a conversion cable that allows connection
directly to the supported MILAN wireless access points and
routers.
Features
• 2.4GHz frequency range, 18 dBi gain
• Directional orientation for precise wireless signals
• Best for long-range point-to-point applications
• Made from waterproof & corrosion resistant material
for outdoor applications.
• Includes cables that convert N-female to RP-SMA connector.
|
Product
Number
2) MIL-AS15-F18
|
Description
Pole or wall-mount flat panel 18dBi gain - Beam Width H80
V80 |
 |
ShAir™
Bridge Outdoor Antenna Kit
The
MILAN MIL-AS15-P18 High-Gain Yagi antenna connects to MILAN’s
ShAir Bridge™ or ShAir AccessG™ wireless access
points to extend the range of coverage for the wireless network.
The MILAN MIL-AS15-P18 antenna provides extended coverage
for an existing 802.11b or 802.11g wireless local area network
(WLAN). The MILAN MIL-AS15-P18 comes with a conversion cable
that allows connection directly to a variety of wireless devices
such as MILAN’s ShAir Bridge™ or ShAir AccessG™
wireless access points.
This product contains the following items: Mounting Kit, Lightning
Surge Protector and Conversion Cable.
The MILAN MIL-AS15-P18 requires an access point or wireless
broadband gateways with a reverse SMA connector. The MILAN
MIL-AS15-P18 includes a conversion cable that allows connection
directly to the supported MILAN wireless access points and
routers.
Features
• 2.4 GHz frequency range
• Directional orientation for precise wireless signals
• Best for long-range point-to-point applications
• Made from waterproof & corrosion resistant material
for
outdoor applications. |
Product
Number
3)
MIL-AS15-P18
|
Description
Pole-mount Yagi Directional 18dBi gain - Beam Width H15 V15 |
 |
ShAir™
Bridge Outdoor Antenna Kit
The MILAN MIL-AS30-F14 connects to
MILAN’s ShAir Bridge™ or ShAir AccessG™
wireless access points to extend the range of coverage for
the wireless network.
The MILAN MIL-AS30-F14 antenna provides extended coverage
for an existing 802.11b wireless local area network (WLAN).
The MILAN MIL-AS30-F14 comes with a conversion cable that
allows connection directly to a variety of wireless devices
such as MILAN’s ShAir Bridge™ or ShAir AccessG™
wireless access points.
This product includes the following items: Mounting Kit, Lightning
Surge Protector and Conversion Cable.
The MILAN MIL-AS30-F14 requires an access point or wireless
broadband gateways with a reverse SMA connector. The MILAN
MIL-AS30-F14 includes a conversion cable that allows connection
directly to the supported MILAN wireless access points and
routers.
Features
• 2.4 GHz frequency range, 14 dBi Gain
• Swivel mount for directional orientation
• Directional orientation for precise wireless signals
• Best for long-range point-to-point applications.
• Made from waterproof & corrosion resistant material
for outdoor applications.
• Includes cables that convert N-female to RP-SMA connector.
|
Product
Number
4)
MIL-AS30-F14
|
Description
Pole
or wall-mount Directional 14dBi gain - Beam Width H30 V30
|
 |
ShAir™
Bridge Outdoor Antenna Kit
The
MILAN MIL-AS80-F08 is a Pico Cell Patch Antenna for wireless
data transmission in indoor or outdoor environments. The MIL-AS80-F08
provides 8.5 dBi signal strength operating on 2.4~2.5 GHz
ISM band (Industrial, Scientific and Medical). This provides
wider range of wireless coverage to reduce the cost of running
standard cable lines.
The MIL-AS800-F08 is a convenient way to extend wireless coverage
to an existing 802.11b or 802.11g wireless LAN network. The
MIL-AS80-F08 can be used with MILAN's ShAir Bridge™
or ShAir AccessG™ wireless access points. The MIL-AS80-F08
is weather-proof and made of corrosion-resistant material
to withstand harsh outdoor conditions.
The MILAN MIL-AS80-F08 includes a swivel mount that allows
pivotal adjustment for precise positioning for the most concentrated
signal strength. The MILAN MIL-AS80-F08 includes a Ligtning
Surge Protector and 3 meters of extension cable.
Features
• 2.4GHz frequency range, 8.5 dBi gain
• Swival mount for directional orientation
• Directional orientation for precise wireless signals
• Best for point-to-point applications
• Made from waterproof & corrosion resistant material
for outdoor applications.
• Includes cables that convert N-female to RP-SMA connector
|
Product
Number
5)
MIL-AS80-F08
|
Description
Pole
or wall-mount Directional 8.5dBi gain - Beam Width H80 V80
|
 |
ShAir
AccessG-Pro™ 802.11g Managed WAP/Bridge with PoE
Cost-Effective, Enterprise-Class
Wireless Solution
Introducing MILAN’s new cost-effective, enterprise-class
wireless access point. The ShAir AccessG-Pro™ AP/Bridge
is a 2.4 GHz IEEE 802.11g wireless bridge that allows bridging
of two or more wired LANs, to connect difficult-to-wire locations,
and makes it possible for multiple buildings to share an Internet
connection. The ShAir AccessG-Pro™ AP/Bridge has three
operational modes: Access Point, Access Point/Bridge, and
Client Mode. The Access Point/Bridge mode provides both Access
Point and Bridging functionalities. The Bridging function
is supported through Wireless Distribution System (WDS). The
Client mode allows the ShAir AccessG Pro AP/Bridge to connect
to other industry standard 802.11b/g access points providing
a simple solution to wirelessly share network resources amongst
a wired workgroup. In addition, the ShAir AccessG-Pro™
AP/Bridge integrates Power-over-Ethernet (PoE) technology
that eliminates extra cable during deployment and can be powered
up where electrical outlets are not available or cost prohibited.
Robust Security
The ShAir AccessG-Pro™ AP/Bridge supports enterprise-class
wireless security features such as 64-bit or 128-bit key WEP
wireless data encryption, IEEE 802.1x RADIUS Authentication,
the new Wi-Fi Protected Access (WPA), disabled SSID broadcast,
wireless client isolation, and MAC address filtering to block
unauthorized wireless clients. In addition, the new ShAir
AccessG-Pro™ AP/Bridge also provides multiple levels
of protocol filtering (Ethernet, IP, TCP/UDP) to further ensure
network security.
Enterprise-Class Network Management
To simplify and reduce IT staffs workload and mean time-to-repair,
the new ShAir AccessG-Pro™ AP/Bridge offers extensive,
enterprise-class management features. First of all, the web-based
management interface makes configuring and managing the ShAir
AccessG-Pro™ a snap. IT professionals can also use Telnet
or TFTP to quickly and easily manage the device. In addition,
the ShAir AccessG-Pro™ AP/Bridge supports SNMP allowing
easy integration of your wireless LAN with your existing wired
infrastructure. Above all, ShAir AccessG-Pro™ AP/Bridge
comes with the ShAir Wireless Management Utility that allows
users to remotely manage, configure, update, and monitor multiple
ShAir AccessG-Pro™s simultaneously. These management
features ease Network Administrators’ large-scale deployment
or remote management problems.
Outstanding Value
With the high-value price point, feature-rich design, and
enterprise-class management options, MILAN’s new ShAir
AccessG-Pro™ AP/Bridge reduces IT work burdens and lowers
Total Cost of Ownership, yields a high return on investment,
and is ideal for delivering highly reliable, wireless voice,
video, and data services over a single network infrastructure.
Features
• IEEE Compliance
• Graphical User Interface:
• Remote Management:
• SNMP
• Power over Ethernet
• Security
• Client Isolation
• Client Association Control
• Antenna Alignment Assistance
• Universal Plug-n Play (UPnP)
• AP Load Balancing |
Product
Number
6) MIL-W2332G
|
Description
ShAir AccessG-Pro™ 802.11g Managed WAP/Bridge with PoE |
 |
ShAir™
Bridge Indoor Antenna Kits
MiLAN, an industry leader in networking,
introduces the MIL-AO40-F04 2.4GHz Omni-Directional Indoor
Antenna. The MIL-AO40-F04 provides increased coverage for
an existing 802.11b/g wireless network.
The MIL-AO40-F04 Omni-Directional Indoor Antenna is a 4dBi
omni-directional antenna, giving you 360 degrees of increased
wireless signal range. This 4dBi antenna also improves signal
quality, reducing dead spots in your wireless coverage.
The MiLAN MIL-AO40-F04 Omni-Directional Indoor Antenna connects
to a variety of Wireless devices. Using a SMA connector or
the included conversion adapter (RP-SMA to SMA), the MiLAN
MIL-AO40-F04 also easily connects to other wireless networking
devices.
The MIL-AO40-F04 omni-directional design gives you increased
wireless signal range in all directions. Avoid the cost of
adding additional access points or wireless repeaters when
you can easily use the MIL-AO40-F04.
The MIL-AO40-F04 Omni-Directional Indoor Antenna includes
a sturdy stand for placement on flat surfaces and can also
be mounted on a wall.
Features
• Increase the range of your wireles device.
• 360 degrees of expanded range
• Wall-mountable design
• Works with 802.11b and 802.11g compliant devices. |
Product
Number
7) MIL-AO40-F04
|
Description
Wall/Ceiling/Desk - Gain: 4 dBi - Omni Beam Width: H360 V40 |
 |
ShAir™
Bridge Indoor Antenna Kits |
Product
Number
8) MIL-AS80-F06 |
Description
Indoor ceiling/wall/desk wireless antenna extension -6dBi;
Beam Width: H80 V80 |
MIL-W2732G |
ShAir
Access54™ Wireless Adapters
Most Cost-Effective Wireless
Solutions
As your wireless networking demand grows, you’ll need
MILAN's new ShAIR Access54™ High-Speed Wireless Client
Adapters to help you speed up transfers of digital pictures,
video, music, and other data files—wirelessly at speeds
up to 5x faster than conventional 802.11b wireless connections.
By taking advantage of the new IEEE 802.11g wireless standard,
you’ll be moving data and digital multimedia files on
your wireless networks at a blazing fast 54 Mbps.
ShAIR Access54™ adapters are also backwards-compatible
with the older IEEE 802.11b standard, which means that by
using the ShAIR Access54 adapter, you will be able to connect
to either wireless standard, giving you greater versatility
and flexibility.
To protect your valuable data and privacy, ShAIR Access54™
is equipped with the highest wireless security technology
available. Not only do they supports both 64-bit and 128-bit
WEP (Wired Equivalent Privacy) encryption, the ShAIR Access54
client adapters now support enterprise-level security standards
such as WPA (Wi-Fi Protected Access) and IEEE802.1x RADIUS
Authentication• to safeguard all wireless data transmissions.
You'll also be able to connect with any of the growing number
of public wireless hotspots springing up in coffee shops,
airport lounges, hotels, and convention centers. And as those
hotspots upgrade to the new high-speed 802.11g standard, you'll
be ready to take advantage of the increased speeds.
Features
• Blazing fast wireless network connection up to
54 Mbps (IEEE 802.11g)
• Backwards compatible with MILAN’s ShAir AccessG™
AP,
ShAir AccessG-Pro™ AP ShAir Office™, ShAir
Bridge™ and
all other IEEE802.11b/g based wireless products
• Share broadband and network resources from home, office,
and public hotspots
• Simplify wireless connections with built-in configuration
and site manager. |
MIL-W2631G |
MIL-W2831G |
Product
Number
9) MIL-W2631G
10) MIL-W2732G
11) MIL-W2831G |
Description
ShAir Access54™ Wireless PCI adapter
ShAir Access54™ 802.11g Wireless CardBus Adapter
ShAir Access54™ Wireless USB 2.0 Adapter |
