 |
5
& 8 Port 10/100 switches
With award-winning performance in
an incredibly compact design, MiLAN's MIL-S500 and MIL-S800
Switches auto-negotiate 10/100Mbps connections for fast and
simple switching in workgroup, small office, and home environments.
Features include:
Full/Half Duplex
Each port capable of operating at full or half duplex, allowing
up to 200 Mbps for end users. Flow control and back pressure
minimize packet loss and maximize performance
High-performance Switching
Non-blocking architecture assures rapid packet delivery, while
extensive MAC address tables and memory buffering provide
swift lookup and packet forwarding
Automatic MDI/MDIX
Provides automatic cable detection on 10/100BASE-TX ports
for adjusting to straight-through or crossover cables during
installation
Ruggedized Chassis
Sturdy metal enclosures with optional mounting brackets and
magnets for installation in non-traditional environments
Straightforward Diagnostics
Perpetual port status provided via front-side LEDs to simplify
troubleshooting
Quiet and Cool
No fans need because product operates without increased heat
Secure and Safe
UL, cUL, and TUV Certifications; conforms to IEEE 802.3, 802.3u,
and 802.3x standards
Features
• Very small size
• Filtering / Forwarding / Learning:Non-blocking, full
wire speed
• Ports: Auto-negotiating for speed and duplex
• Forwarding mode: Store-and-forward
• Auto-MDI/MDIX: Crossover cables not needed
• MAC address table: Stores up to 4,000 addresses &
128KB memory buffer sharing
• LEDs: Power, 100 Mbps, Link/Activity, FDX/COL |
Product
Number
1) MIL-S500
2) MIL-S800
|
Port
One
(5) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
|
 |
16
or 24-port 10/100/1000BASE-T Switches with (2) SFP uplink
slots
Next Generation of Copper and Fiber Switching
The switch provides a 48Gbps Gigabit switching performance
with an added benefit of combining copper and fiber interfaces
in a compact 1U design. The MIL-S16002TG and MIL-S24002TG
delivers cost-efficient switching capability for 16 or 24
ports of Copper Gigabit Ethernet and two combo ports for SFP
based Gigabit Ethernet.
Two Combo SFP Ports
Both switches enable fiber connectivity through two hot-swappable
Small Form-factor Pluggable (SFP) gigabit interfaces.
With Gigabit Ethernet rapidly gaining in popularity, network
administrators are demanding higher density 10/100/1000 Mbps
switches.
(16) or (24) 10/100/1000BASE-T Ports
The MIL-S16002TG and MIL-S24002TG are hard-working switches
that deliver exceptional performance. Combining wire-speed
switch fabric together with shared memory architecture design,
they eliminate head-of-line blocking and easily out perform
other first generation Gigabit switches using old-fashioned
“bridge” architecture. Whether you need 10BaseT,
100BaseTX or 1000BaseT, these switches are ready to run with
any version of Ethernet over copper cabling.
Performance, Performance, Performance
MILAN by Transition Networks delivers the highest performance
switch in its class. A single integrated switch engine automatically
filters and forwards traffic at full line rate for all 16
or 24 ports simultaneously. With a Jumbo Frame compatible
network infrastructure, you’ll be transferring data
at Ethernet Packet of 9 KB instead of 1.5KB—that’s
almost 4X larger than conventional switches.
Whether your workgroup has 10 nodes or 32K nodes, the MIL-S16002TG
learns and supports all your addresses in memory for maximum
network throughput.
Features
• Full wire speed reception and transmission with 48
Gbps backplane speed
• (2) SFP combo ports for optical connectivity
• Rugged metal chassis with external power supply
• Supports IEEE 802.3x Flow Control for full duplex
• JUMBO Frames Support |
Product
Number
3) MIL-S16002TGUS
4) MIL-S24002TGUS
|
Port
One
(16) 10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
(24) 10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
|
Port
Two
(2) SFP Slot (empty)
(2) SFP Slot (empty) |
 |
8
port 10/100 switches with internal power supply
The Industry’s Smallest 8-port
Switch with an internal power supply, MiLAN's MIL-S800i auto-negotiates
10/100Mbps connections for fast and simple switching in workgroup,
small office, and home environments. Features include:
Full/Half Duplex
Each port is capable of operating at full or half duplex,
allowing up to 200 Mbps for end users. Flow control and back
pressure minimize packet loss and maximize performance
High-performance Switching
Non-blocking architecture assures rapid packet delivery, while
4K MAC address table and memory buffering provide swift lookup
and packet forwarding
MDI/MDIX
Provides automatic cable detection on 10/100BASE-TX ports
for adjusting to straight-through or crossover cables during
installation
Ruggedized Chassis
Sturdy metal enclosures with wall hole mounts and magnets
for installation in non-traditional environments
Straightforward Diagnostics
Perpetual port status provided via LEDs to simplify troubleshooting
Secure and Safe
Class B, UL, cUL, and TUV Certifications; conforms to IEEE
802.3, 802.3u, and 802.3x standards
Features
• Non-blocking wire speed performance
• Ports: Auto-negotiating for speed and duplex
• Forwarding mode: Store-and-forward
• Auto-MDI/MDIX: Crossover cables not needed
• MAC address table: Stores up to 4,000 addresses &
256KB memory buffer sharing
• LEDs: Power, 100 Mbps, Link/Activity, FDX/COL |
Product
Number
5) MIL-S800i
|
Port
One
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
|
| |
Unmanaged
10/100 copper switches with Fiber Port
MiLAN's Ethernet/Fast Ethernet Switches
with Fiber provide multiple 10/100BASE-TX ports with one 100BASE-FX
fiber port. The MIL-S501 and MIL-S801 Series are ideal for
alleviating traffic bottlenecks in workgroup environments:
by combining copper and fiber ports in the same chassis, they
offer an inexpensive solution for segmenting LANs and easily
interconnecting networks in campus or multi-tenant environments.
High-Powered Switching
Each switch operates at wire speed with automatic MAC address
learning and aging, requiring no user configuration; MIL-S801
has non-blocking 1.8Gbps architecture assuring rapid packet
delivery
Half/Full Duplex
All ports running at 100 Mbps operate in either half or full
duplex mode, providing up to 200 Mbps of bandwidth for end
users
Simple Configuration
Flow control minimizes packet loss, while all copper ports
auto negotiate for speed
Fiber Connectivity
Four different connection types: SC, ST, MT-RJ and VF-45 for
Multi-mode; SC for Single-mode - ideal for linking long-distance
network segments up to 37 miles (60km)
Auto MDI/MDIX
MIL-S801 Series offers automatic cable detection for adjusting
10/100BASE-TX ports to straight-through or crossover cables
during install
Compact and Flexible
Sturdy metal enclosure with wall mounts, optional mounting
brackets and all media connections on front panel
Features
• Auto-Negotiation
• Port Setting via DIP switches
• Full/Half duplex Flow Control |
Product
Number
6) MIL-S501MT
|
Port
One
(5) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
(1) 100BASE-FX 1300nm
multimode (MT-RJ)
[2 km/1.2 miles] |
7)
MIL-S501SC
|
(5) 10/100BASE-TX
(RJ-45)
[100 m/328 ft.]
|
(1) 100BASE-FX
1300nm
multimode (SC)
[2 km/1.2 miles] |
8)
MIL-S501SC-15
|
(5) 10/100BASE-TX
(RJ-45)
[100 m/328 ft.]
|
(1) 100BASE-FX
1310nm
single mode (SC)
[15 km/9.5 miles] |
9)
MIL-S501SC-60
|
(5) 10/100BASE-TX
(RJ-45)
[100 m/328 ft.]
|
(1) 100BASE-FX
1310nm
single mode (SC)
[60 km/37.3 miles] |
10)
MIL-S501ST
|
(5) 10/100BASE-TX
(RJ-45)
[100 m/328 ft.]
|
(1) 100BASE-FX
1300nm
multimode (ST) [2 km/1.2 miles] |
11)
MIL-S501VF
|
(5) 10/100BASE-TX
(RJ-45)
[100 m/328 ft.]
|
(1) 100BASE-FX
1300nm
multimode (VF-45)
[2 km/1.2 miles] |
12)
MIL-S801SC
|
(8) 10/100BASE-TX
(RJ-45)
[100 m/328 ft.]
|
(1) 100BASE-FX
1300nm
multimode (SC) [2 km/1.2 miles] |
13)
MIL-S801ST
|
(8) 10/100BASE-TX
(RJ-45)
[100 m/328 ft.]
|
(1) 100BASE-FX
1300nm
multimode (ST) [2 km/1.2 miles] |
| 14)
MIL-S801VF |
(8) 10/100BASE-TX
(RJ-45)
[100 m/328 ft.] |
(1) 100BASE-FX
1300nm
multimode (VF-45)
[2 km/1.2 miles] |
 |
Small
form factor 16 & 24 port 10/100 switches
Full/Half Duplex
MiLAN’s MIL-S1600S and MIL-S2400S compact Fast Ethernet
Switches have sixteen or twenty-four 10/100 Base-TX ports
with low latency and error-free performance provided via an
advanced store-and-forward architecture. Other features include:
Automatic MDI / MDIX
Cable detection and correction is automatic as the switch
adjusts for straight-through or crossover cables during installation
- no uplink port necessary
High-performance Switching
Non-blocking architecture assures rapid packet delivery and
the extensive 8,000 MAC address table and memory buffering
provide swift lookup and packet forwarding
Full Duplex Operation
Bandwidth for each port is effectively doubled, increasing
the speed of a 100Mbps port to 200Mbps
Flow Control
Enhances packet transmission by full-duplex flow control and
half-duplex back pressure, providing congestion control on
busy ports
Rugged Chassis
Sturdy metal enclosures for added durability
Straight Forward Diagnostics
Perpetual port status provided via LEDs to simplify troubleshooting
Standards
Conforms to IEEE 802.3, 802.3u, and 802.3x standards
Features
• Auto-negotiation for rate and duplex on all ports
• Full wire-speed forwarding rate
• 8K-entry MAC address table
• LED-indicators for Power, Link/Activity
• Pause-Frame flow control on Full-duplex ports
• Back-Pressure flow control on Half-duplex ports
• 3.2Gbps aggregate bandwidth -MIL-S1600S
• 4.8Gbps aggregate bandwidth -MIL-S2400S
• 200Mbps speeds supported on all ports
• Compact size for desktop or wiring closet
• No fans |
Product
Number
15) MIL-S1600S
16) MIL-S2400S
|
Port
One
(16) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(24) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two |
|
Standard
16 & 24-port 10/100 switches
MIL-S1600/S2400
MiLAN’s MIL-S1600 and MIL-S2400
Fast Ethernet Switches have sixteen and twenty-four 10/100
Base-TX ports, respectively, with the option of adding 100Base-FX
modules. Low latency, error-free performance is provided via
an advanced store-and-forward architecture. Other features
include:
Automatic MDI / MDIX
Cable detection and correction is automatic as the switch
adjusts for straight-through or crossover cables during installation
Full Duplex Operation
Bandwidth for each port is effectively doubled, increasing
the speed of a 100Mbps port to 200Mbps
Flow Control
Enhances packet transmission by full-duplex flow control and
half-duplex back pressure, providing congestion control on
busy ports
Optional Fiber Port
Front-panel accessible fiber port is available in either multimode
or single mode models and a variety of connector types for
extending network distances up to 60 km
Support for Local and Long-Haul Connectivity
Connects to legacy copper networks while simultaneously linking
distant segments via multimode or single mode fiber
Installation
Rack-mount design and for added sturdiness the switches are
designed with metal chassis and include a rack mount kit
Features
• Filtering and forwarding at full wire speed on all
ports
• At-a-glance LEDs for port status and network activity
• Automatic address learning for rapid packet forwarding
• Easy to install-no complicated setup procedures |
Product
Number
17) MIL-S1600
18) MIL-S2400
|
Port
One
(16) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(24) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two |
 |
Unmanaged
5 & 8 port 10/100/1000 switches
With Gigabit Ethernet rapidly gaining
in popularity, MiLAN Technology is excited to introduce a
new 5-Port Gigabit Ethernet switch that will transform your
current crawling Fast Ethernet network into blazing fast network
that runs at 1000 Mbps!
Four 10/100/1000BaseT Ports in a small footprint
The MIL-S5000T is a hard-working switch that delivers exceptional
performance. Right out of the box, the MIL-S5000T gives you
five 10/100/1000 Gigabit Ethernet ports and best yet, it takes
up as little desk space as your tiny USB hub. Imagine transferring
data/MP3/Multimedia files across your network at 2 Gbps full
duplex, the waiting game is eliminated. Whether you need 10BaseT,
100BaseTX or 1000BaseT, this switch is ready to run with any
version of Ethernet over copper cabling.
Performance, Performance, Performance
MiLAN once again delivers the highest performance switch in
its class. A single integrated switch engine automatically
filters and forwards traffic at full line rate for all 5 ports
simultaneously.
Features
• (5) 10/100/1000BaseT ports
• Smallest footprint takes up minimal desktop space
• Compatible with any computers/laptop machines with
an Ethernet port
• Supports Auto-MDI/MDIX eliminates cabling confusions
|
Product
Number
19) MIL-S5000T
20) MIL-S8000T |
Port
One
(5) 10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
(8) 10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
|
Port
Two |
 |
10/100/1000
Console Managed Switches
MiLAN’s Gigabit Ethernet over copper
technology is a cost effective way for network equipment to
be upgraded from Fast Ethernet to Gigabit speeds. By using
standard 4-pair Category 5 copper cabling, you don’t
need to pull expensive fiber optic cabling. This technology
will create high-speed backbone connections between switches,
servers, database and end stations.
MiLAN’s MIL-S8000G Gigabit Ethernet Switch has eight
10/100/1000 Base-TX ports with low latency and error-free
performance provided via an advanced store-and-forward architecture.
Other features include:
Automatic MDI / MDIX
Cable detection and correction is automatic as the switch
adjusts for straight-through or crossover cables during installation
- no uplink port necessary
High-performance Switching
Non-blocking architecture backplane of 16G assures rapid packet
delivery and the extensive 8,000 MAC address table and memory
buffering provide swift lookup and packet forwarding
Full Duplex Operation
Bandwidth for each port is effectively doubled, increasing
the speed of a 1000Mbps port to 2000Mbps
Flow Control
Enhances packet transmission by full-duplex flow control and
half-duplex back pressure, providing congestion control on
busy ports
Console Management
Light management via the console port- Port Status, Port configuration,
Port-based Vlans, Port trunking, Port Mirroring, Aging
Rugged Chassis
Standard 19-inch rackmount design with mounting brackets included
Standards
Conforms to IEEE 802.3, 802.3u, 802.3ab and 802.3x standards
Features
• Auto-negotiation for rate and duplex on all ports
• Full wire-speed forwarding rate
• 8K-entry MAC address table
• LED-indicators for Power,100, 1000, Link/Activity,
Full Duplex/Collision
• Pause-Frame flow control on Full-duplex ports
• Back-Pressure flow control on Half-duplex ports
• 16 Gbps aggregate bandwidth
• 2000Mbps speeds supported on all ports
• Integrated 512kb data packet memory
• Plug and Play configuration auto address learning
• Console management-Port Configuration and Status
• Port-based Vlans, Port Mirroring, Port Trunking, Aging |
Product
Number
21) MIL-S8000G
|
Port
One
(8) 10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
|
Port
Two
|
 |
10/100/1000
Plus SFP Slot Console Managed Switches
The Smart Choice for Flexible, Gigabit Ethernet!
With Gigabit Ethernet rapidly becoming the de facto standard,
MiLAN Technology is proud to introduce our new 8-Port Gigabit
Ethernet switch. The new MIL-S8001TG will transform your current
Fast Ethernet network into a blazing fast Gigabit Ethernet
network that runs at 1000 Mbps!
Converge Copper and Fiber Gigabit Networks
The MIL-S8001TG is a hard-working switch that delivers exceptional
performance. Right out of the box, the MIL-S8001TG gives you
eight10/100/1000 Gigabit Ethernet ports and a Mini-GBIC slot
that will interface with any industry-standard Small-Form-Pluggable
Gigabit Ethernet Interface transceivers. The addition of the
Mini-GBIC slot allows for flexible Gigabit fiber deployment
by converging it with cost-effective Gigabit copper connectivity.
Imagine transferring data/voice/multimedia files across your
network at 2 Gbps full duplex per port, the waiting game is
over.
Smart Connectivity
Like all MiLAN unmanaged switches, the MIL-S8001TG is completely
plugand- play; no configuration is required for basic operation.
Advanced configurations can be accessed through MiLAN’s
easy to use menu-driven management system.
Features
• Gigabit Ports - 8
• Mini-GBIC Slot - 1
• Plug-n-Play - Yes
• Configure via Console - Yes
• 802.1Q VLAN - Yes
• Quality of Service - Yes
• Port Trunking - Yes
• Broadcast Storm Filtering - Yes
•
Console-Managed. All advanced features are
accessible from an easy-to use console interface.
No cryptic command line commands or third
party network management applications required
• VLAN. Supports 4K 802.1Q tagged-based VLANs
plus port-based VLANs
• Quality of Service (QoS). 802.1p/TOS support
efficiently control network resources by classifying
traffic and prioritizing network traffic flows
• Supports Broadcast Storm Filtering that eliminates
unnecessary network traffic
• Increase network performance with 9.5KB
Jumbo Frame support |
Product
Number
22) MIL-S8001TG
|
Port
One
(8) 10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
|
Port
Two
(1) SFP Slot (empty) |
| |
10/100
or 1000 Unmanaged Modular Switch
MILAN's Modular Switch with Fiber
combines media conversion with a robust switching architecture
to provide full wire speed across all ports and a 9.6Gbps
back plane speed. Populate the compact 4-slot chassis with
any of up to eleven Fiber or Ethernet modules and create an
affordable solution for nearly any local area switching requirement.
Full/Half Duplex
Each port is capable of operating at full or half duplex,
allowing up to 200 Mbps for end users. Flow control and back
pressure minimize packet loss and maximize performance.
High-performance Switching
Modules support up to 12K MAC addresses, with automatic address
learning and aging eliminating the need for user configuration;
store-and-forward architecture with filter and forwarding
rates at wire speeds.
Fiber Connectivity
Ten different fiber modules with connectors for SC, ST, MT-RJ
and VF-45 to meet distance requirements from 2 to 10km.
Straightforward Diagnostics
Perpetual port status provided via LEDs to simplify troubleshooting.
Secure and Safe
UL and TUV Certifications; conforms to IEEE 802.3, 802.3u,
and 802.3z standards.
Features
• Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration
to
achieve the best possible mode of operation over a
link.
• Port Setting via DIP switches
• Full/Half duplex Flow Control |
Product
Number
23) MIL-S1000
|
Port
One
(4) Empty Slot for
MIL-S26/36/66/67 interfaces |
Port
Two |
