Media Conversion GBIC/SFP Modules Transceivers Network Interface Cards & PCMCIA Adapters Managed Switches Unmanaged Switches Wireless Power over Ethernet Hubs & Repeaters Baluns & Cabling Connectors Patch Cords Transceivers Whatever your connection needs, there's a Transition Networks' transceiver that's exactly right for the job. Transition's transceivers let you increase the range of components and vendors you can use, cut your cabling costs and ensure fiber segment availability. Ethernet Ethernet 10BASE2 to AUI Transceiver The transceiver efficiently converts AUI ports to 10Base2. It quickly provides the necessary interface to network workstations, PCs, and other Ethernet devices while eliminating bulky drop cabling. Its small form factor does not block I/O ports. The sturdy metal case ensures years of trouble-free operation. Features • The Original Direct Connect Micro-Sized Transceiver • Eliminates bulky drop cabling • Does not block I/O ports • Efficient design allows for longer life • 5 year warranty • Converts AUI ports to 10BASE2 thin coax cabling • Compact size • Low power design uses less than 200mA @ 12VDC • Externally SQE selectable and internally Link selectable Product Number 1) MIL-05T Port One 10BASE5 (AUI (DB-15) male) = [50 m/164 ft.] Port Two 10BASE2 (BNC) [185 m/607 ft.] Ethernet 10BASE-T to AUI Transceiver This Attachment Unit Interface (AUI) transceiver provides a method for connecting a workstation, or any other device with an AUI port, to twisted pair cabling in a 10BASE-T network. Devices with AUI ports could include: servers, hubs, bridges and routers. The E-TBT-MC04 transceiver allows twisted pair, UTP or STP, to be connected to these AUI ports. Features • Provides a complete interface of the AUI to Ethernet UTP cable. • Supports data transfer rate of 10Mbps • CSMA/CD access mechanism • Capable of driving the UTP cable segment up to 100 meters   (328 ft.) without the use of a repeater. • Selectable Link test and SQE test functions • AUI locking post design allows the E-TBT-MC04 to directly   attach to a host’s AUI connector • Can be used with or without an AUI cable • LED indicators for network monitoring and diagnosing • The RJ-45 port will automatically detect and reverse the   polarity on the receive pair if needed. Product Number 2) E-TBT-MC04 Port One   10BASE-T (RJ-45) [100 m/328 ft.] Port Two 10BASE5 (AUI (DB-15) male) [50 m/164 ft.] Ethernet AUI to 10BASE-FLTransceivers The Full/Half-Duplex 10BASE-FL Transceiver provides low cost network migration options. Features • Available in both multimode and single mode fiber optic versions. • Link Pass Through   Link Pass Through is a troubleshooting feature that allows   the media converter to monitor both the fiber and copper   RX ports for loss of signal. • Single mode version supports segments up to   15,000 meters in length. • Both multimode and single mode transceivers connect AUI male   (DB-15) nodes to a fiber optic medium via a standard ST type   connector in both full and half-duplex modes. The ability to operate   in full-duplex mode allows for operation between switches,   routers and servers using full-duplex Ethernet. • Multimode version takes advantage of full duplex transmission   to increase data rates between devices up to 20 Mbps. • Long-Haul version, E-FRL-MC05(L), uses a 1300nm LED rather   than the standard 850nm LED, so it can transmit and receive   data over distances up to 5,000 meters. That's almost a   3,000-meter advantage over the standard 10BASE-FL   distance of 2,000 meters. Product Number 3) E-FRL-MC05 4) E-FRL-MC05(L) 5) E-FRL-MC05(SC) 6) E-FRL-MC05(SM) Port One   10BASE5 (AUI (DB-15) male) [50 m/164 ft.] 10BASE5 (AUI (DB-15) male) [50 m/164 ft.] 10BASE5 (AUI (DB-15) male) [50 m/164 ft.] 10BASE5 (AUI (DB-15) male) [50 m/164 ft.] Port Two 10BASE-FL 850nm multimode (ST) [2 km/1.2 miles] 10BASE-FL 1300nm multimode (SC) [5 km/3.1 miles] 10BASE-FL 850nm multimode (SC) [2 km/1.2 miles] 10BASE-FL 1310nm single mode (ST) [20 km/12.4 miles] Fast Ethernet Fast Ethernet MII to 100BASE-FX Transceivers The Full/Half-Duplex 100BASE-FX Transceiver provides low cost and high performance network migration options. Features • Connects MII nodes via an ST or SC type connector, to a fiber   optic medium in both full and half-duplex modes. (The ability to   operate in full-duplex mode allows for operation between   switches and routers using full-duplex Fast Ethernet.) • Support fiber optic segments up to 2,000 meters on   multimode fiber. • Single mode version supports fiber optic segments   up to 20,000 meters. Product Number 1) E-FX-MC01 2) E-FX-MC01(SC) Port One MII (DB-40) MII (DB-40) Port Two 100BASE-FX 1300nm multimode (ST) [2 km/1.2 miles] 100BASE-FX 1300nm multimode (ST) [2 km/1.2 miles] For additional information, options and pricing about our ThinkCP™ products, please contact our sales representatives - (800)726-2477 or email - SalesDesk AT ThinkCP.com Copyright © 1997 - 2008 H. Co. Computer Products. All Rights Reserved. ThinkCP™ and H. Co. Computer Products™ are trademarks or registered trademarks of H. Co. Computer Products, Inc. For additional information regarding our trademarks, please visit Trademark Info at http://www.ThinkCP.com. This list is not intended to be an all-inclusive or comprehensive list of all H. Co. Computer Products trademarks and/or intellectual properties. Other product names used herein are for identification purposes only and may be the respective property or trademarks of other companies.