 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
 |
Think Side Menu
 |
|
 |
 |
Managed
Switches
|
8-port
10/100 Layer 2 Managed All-Copper Switch
The MIL-SM800P series of layer 2 managed
switches provides high performance non-blocking switching.
The switch has (8) 10/100 auto-MDI/MDIX ports.
Management features include port based, dynamic and static
VLANs, GVRP, VLAN tagging, IGMP Snooping, port mirroring,
and port security. Security includes static addressing, filtering
and blocking of packets to identified MAC addresses. Two priority
queues per port insure minimum delay for voice over IP or
multimedia network data. Console port provides local management
while Telnet and Web-base management is provided via any network
device.
Non-blocking 1.8Gbps architecture assures rapid packet delivery
while 8,000 MAC address table provides swift lookup and packet
forwarding.
Other ASIC features that enhance performance are included
such as 802.1d spanning tree, 802.3x flow control, 802.1ad
link aggregation and broadcast storm control.
Features
• Non-blocking full wire speed performance
• Store-and-forward architecture
• 10-inch design for desktop or rackmount
• Static MAC addresses for secure network
• Backpressure and flow control
• Console port on rear panel
• Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet
Standards
• Automatic MDI/MDIX crossover for each 10Base-T/100Base-TX
port |
Product
Number
1) MIL-SM800P
|
Port
One
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
|
|
8-port
10/100 Layer 2 Managed Switch with
100BASE-FX uplink port
The MIL-SM801series of layer 2 managed
switches provides high performance non-blocking switching.
The switch has (8) 10/100 auto-MDI/MDIX ports and one fixed
100Mbps fiber port. The fiber port provides connectors of
SC,ST, MT-RJ and VF-45 with five different ordering options
of single mode and multi-mode.
MIL-SM801 series of switches management features include
port based, dynamic and static VLANs, GVRP, VLAN tagging,
IGMP Snooping, port mirroring, port security. Security includes
static addressing, filtering and blocking of packets to
identified MAC addresses. Two priority queues per port insure
minimum delay for voice over IP or multimedia network data.
Console port provides local management while Telnet and
Web-base management is provided via any network device.
Non-blocking 1.8Gbps architecture assures rapid packet delivery
while 8,000 MAC address table provides swift lookup and
packet forwarding.
Other ASIC features that enhance performance are included
such as 802.1d spanning tree, 802.3x flow control, 802.1ad
link aggregation and broadcast storm control.
Features
• Automatic MDI/MDIX crossover for each 10Base-T/100Base-TX
port
• Non-blocking full wire speed performance
• Store-and-forward architecture
• 10-inch design for desktop or rackmount
• Static MAC addresses for secure network
• Backpressure and flow control
• Console port on rear panel
• Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet
Standards
• Automatic MDI/MDIX crossover for each 10Base-T/100Base-TX
port
• 802.1Q VLAN Full Management
• Advanced QoS Management |
Product
Number
2) MIL-SM801PMT
3) MIL-SM801PSC
4) MIL-SM801PSC-15
5)
MIL-SM801PST
6) MIL-SM801PVF
|
Port
One
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
(1) 100BASE-FX 1300nm
multimode (MT-RJ)
[2 km/1.2 miles]
(1) 100BASE-FX 1300nm
multimode (SC)
[2 km/1.2 miles]
(1) 100BASE-FX 1310nm
single mode (SC)
[15 km/9.5 miles]
(1) 100BASE-FX 1300nm
multimode (ST)
[2 km/1.2 miles]
(1) 100BASE-FX 1300nm
multimode (VF-45)
[2 km/1.2 miles] |
 |
8-port
10/100 Advanced Layer 2 Managed Switch
The MILAN MIL-SME801P switch is
our most powerful, flexible line of
Layer 2 management switches designed specifically for enterprise
or campus types of applications. Tailor from 3 different
factory configured fiber uplinks to precisely match your
network needs – today and in the future.
• Depending on your network infrastructure, the SME801P’s
100BaseFX Fiber port can be factory configured
to have
multimode SC or ST connector (up to 2 km), or
a single mode
SC connector that supports up to a 60 km fiber connection.
• Secure
your network with built-in IEEE802.1X Authentication
using a centralized RADIUS server.
• Deploy multimedia services (voice, video, audio,
telephony)
throughout your network with multi-service technologies:
IP multicast with IGMP, multiple priority queues,
and 256 VLANs.
• Manage your network bandwidth with per-port Bandwidth
Provisioning and rate metering. This advanced
software
feature is ideal for sophisticated measured Ethernet
service,
including multi-tenant unit (MTU) installations.
Additionally, the MIL-SME801P switch is designed on the
next gener-
ation networking ASIC architecture that sports a 3.6 Gbps
non-blocking backplane speed to assure rapid packet delivery,
while its robust 8000 MAC address table provides swift address
lookup and packet forwarding. Choose telnet, SNMP or web
browser interfaces over in-band Ethernet or out-of-band
serial communications.
Features
• Single-Chip Layer 2
• Switching Architecture
• Flexible Deployment Platform
• Advanced Network Security
• Simplified Network Management
• Bandwidth Provisioning
• Multi-Services for Multimedia
• Virtual LANs
• Total Cost of Ownership |
Product
Number
7) MIL-SME801PSC
8) MIL-SME801PSC-15
9) MIL-SME801PSC-30
10) MIL-SME801PSC-60
11) MIL-SME801PST
|
Port
One
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
(1) 100BASE-FX 1300nm
multimode (SC)
[2 km/1.2 miles]
(1) 100BASE-FX 1310nm
single mode (SC)
[15 km/9.5 miles]
(1) 100BASE-FX 1310nm
single mode (SC)
[30 km/18.6 mi.]
(1) 100BASE-FX 1310nm
single mode (SC)
[60 km/37.3 miles]
(1) 100BASE-FX 1300nm
multimode (ST)
[2 km/1.2 miles] |
|
8-port
10/100 Layer 2 Managed Switch
with Gigabit uplink port
The MIL-SM801 series of layer 2 managed
switches provides high performance non-blocking switching.
The switch has (8) 10/100 auto-MDI/MDIX ports and one fixed
1000Mbps fiber SC port.
MIL-SM801G series switch management features include- port
based, dynamic and static VLANs, GVRP, VLAN tagging, IGMP
snooping, port mirroring, port security. Security includes
static addressing, filtering and blocking of packets to identified
MAC addresses. Two priority queues per port insure minimum
delay for voice over IP or multimedia network data.
Console port provides local management while Telnet and Web-based
management is provided via any network device. Non-blocking
3.6Gbps architecture assures rapid packet delivery while 8K
MAC address table provides swift lookup and packet forwarding.
Other ASIC features that enhance performance are included
such as 802.1d spanning tree, 802.3x flow control, 802.1ad
link aggregation and broadcast storm control.
Features
• Non-blocking full wire speed performance
• Store-and-forward architecture
• 10-inch design for desktop or rackmount
• Static MAC addresses for secure network
• Backpressure and flow control
• Console port on rear panel
• Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet
Standards
• Automatic MDI/MDIX crossover for each 10Base-T/100Base-TX
port
• One fixed 1000BaseFX port with SC connector |
Product
Number
12) MIL-SM801G
13) MIL-SM801GLX-10 |
Port
One
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
(1) 1000BASE-SX 850nm
multimode (SC) [62.5/125µm:
220 m/722 ft.; 50/125µm:
550 m/1804 ft.]
(1) 1000BASE-LX 1310nm
single mode (SC) [10 km/6.2 miles] |
 |
8-port
10/100 Advanced Layer 2+ Managed Switch
with Gigabit uplink port
The MIL-SME801G switch is MiLAN’s
latest achievement of Layer 2+ management switches designed
specifically for enterprise or campus types of applications.
Tailor from 2 different factory configured fiber uplinks to
precisely match your network needs—today and in the
future.
• Depending on your network infrastructure, the SME801G’s
1000Mbps Fiber port can be factory configured to have
Multimode fiber port (up to 550m), or a Singlemode
fiber port that
supports up to 10km fiber connection connecting at
blazing fast
2000Mbps.
• Secure your network with built-in IEEE802.1X Authentication
through a centralized RADIUS server.
• Deploy and manage multimedia services (voice, video,
audio,
and data) throughout your network with multi-service
technologies:
IP multicast with IGMP, multiple priority queues, and
256 VLANs.
• Manage your network bandwidth with MiLAN’s per-port
Bandwidth Provisioning and rate metering. This advanced
software feature is ideal for sophisticated measured
Ethernet
service, including multi-tenant unit (MTU) installations.
Additionally, the MIL-SME801G switch is designed on the next
generation networking ASIC architecture that sports a 3.6
Gbps non-blocking backplane speed to assure rapid packet delivery,
while its robust 8000 MAC address table provides swift address
lookup and packet forwarding. Choose telnet, SNMP or web browser
interfaces over in-band Ethernet or out-of-band serial communications.
Features
• Single Chip Layer 2+ ASIC - Supports L2+ functionalities
include
IEEE802.1x, DHCP Client, Bandwidth Provisioning, and
Secure
VLAN
• Switching Architecture
• Flexible Deployment Platform
• DHCP Client Support
• Advanced Network Security
• Simplified Network Management
• Bandwidth Provisioning
• Multi-Services for Multimedia
• Virtual LANs
• Total Cost of Ownership |
Product
Number
14) MIL-SME801GLX-10
15) MIL-SME801GSX
|
Port
One
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
(1) 1000BASE-LX 1310nm
single mode (SC) [10 km/6.2 miles]
(1) 1000BASE-SX 850nm
multimode (SC) [62.5/125µm:
220 m/722 ft.; 50/125µm:
550 m/1804 ft.] |
 |
8-port
100BASE-FX Layer 2 Manged Switch
with GBIC uplink port
The MIL-SM808G series of layer 2 managed
switches provides high performance non-blocking switching.
The switch has (8) 100BASE-FX ports and one fixed Gigabit
Ethernet GBIC port. This is the ideal switch for aggregating
remote classroom or workgroup switches.
MIL-SM808G series switch management features include- port
based, dynamic and static VLANs, GVRP, VLAN tagging, IGMP
Snooping, port mirroring, port security. Security includes
static addressing, filtering and blocking of frames to identified
MAC addresses. Two priority queues with selection of queue
management, insure minimum delay for voice over IP or multimedia
network data. Console port provides local management while
Telnet and Web-base management is provided via any network
device.
Non-blocking 5.6Gbps, store and forward, shared memory architecture
assures rapid packet delivery while 8,000 MAC address table
provides swift lookup and packet forwarding.
Other ASIC features that enhance performance are included
such as 802.1D spanning tree, 802.3x flow control, 802.1ad
link aggregation and broadcast storm control.
Features
• Conforms to IEEE 802.1D, 802.3u/z/ab Ethernet Standards
• Serial console port for out of band management
• Backpressure and flow control
• Static MAC addresses and MAC filtering for secure
networks
• Designed for desktop or rack mount
• Store-and-forward, shared memory architecture
• Non-blocking full wire speed performance |
Product
Number
16) MIL-SM808GSC
17) MIL-SM808GSC-15
18) MIL-SM808GSC-60
19) MIL-SM808GST
|
Port
One
(8) 100BASE-FX 1300nm
multimode (SC) [2 km/1.2 miles]
(8) 100BASE-FX 1310nm
single mode (SC) [15 km/9.5 miles]
(8) 100BASE-FX 1310nm
single mode (SC) [60 km/37.3 miles]
(8) 100BASE-FX 1300nm
multimode (ST) [2 km/1.2 miles]
|
Port
Two
(1) GBIC Slot for 1000Base-T
(1) GBIC Slot for 1000Base-T
(1) GBIC Slot for 1000Base-T
(1) GBIC Slot for 1000Base-T |
 |
24-port
10/100 Layer 2+ Stackable Managed Switch
with Dual-Port uplink modules
MiLAN's MIL-SM2401M series of layer
2 managed switches provides high performance non-blocking
switching with advanced features. The switch has 24 10/100
auto-MDIXMDIX ports and a dual port module bay for 100Mbps
or 1000Mbps fiber port or copper ports. All fitting into a
1 U high 19 inch rack space.
The MIL-SM2401M management features include port based, dynamic
and static VLANs, GVRP, VLAN tagging, IGMP Snooping, port
mirroring, port security. Security includes static addressing,
filtering and blocking of packets to identified MAC addresses
and IEEE 802.1X authentication utilizing a centralized RADIUS
server. Two priority queues per port insure minimum delay
for voice over IP or multimedia network data. The bandwidth
rate limiting feature allows for selecting different limits
in each direction down to 100 Kbps and in 100 Kbps increments.
Console port provides local management while Telnet and Web-base
management is provided via any network device. Our private
MIB allows for configuring and management from any SNMP Manager.
Non-blocking 8.8Gbps architecture assures rapid packet delivery
while 8K MAC address table provides swift lookup and packet
forwarding. ASIC based counters make SNMP management highly
reliable and accurate.
The IP stacking function allows up to eight MIL-SM2401M-STK
switches to be joined as a single unit group. The stackable
switches can then be managed through a single IP address.
Other features that enhance performance are included such
as 802.1d spanning tree, 802.1w Rapid Spanning Tree, 802.3x
flow control, 802.1ad link aggregation and broadcast storm
control.
Features
• Non-blocking full wire speed performance
• Store-and-forward architecture
• 1 U high 19 inch rack mount design
• IEEE 802.1X support for centralized authentication
or static
MAC address filters for limiting network access.
• Backpressure and flow control
• Console port, Telnet, SNMP or GUI Management
• Conforms to IEEE 802.3, 802.3u, and 802.3x Standards
• Automatic MDI/MDIX crossover for each 10/100 port
• IP Stacking. The IP stacking function allows up to
eight
MIL-SM2401M-STK switches to be joined as a single unit
group.
The stackable switches can then be managed through
a single IP
address. |
Product
Number
20) MIL-SM2401M-STKUS |
Port
One
(24) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
(1) Dual Port Module Bay |
 |
24-port
10/100 Power Over Ethernet Layer 2 Remotely Managed Switch
Features
• 15.4 Watts of DC power per port
• 24 ports with full PoE functionality
• Enable/Disable POE function
• Power limit by classification
• Power limit by management power feeding priority
• Legacy Power Signature Detection for unique electrical
signatures
• Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to
achieve the best possible mode of operation over a
link.
• Auto-MDIX on all ports
• 12K Jumbo Frame support
• True non-blocking switching
• 8K MAC address table
• Back pressure half-duplex
• Flow control full-duplex
• Store and forward switching architecture
• 8.8 Gbps backplane
• 384Kbytes memory buffer |
Product
Number
21) MIL-SM2401MAF
|
Port
One
(24) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
|
Port
Two
(2) SFP/RJ-45 Combo Port
(SFP Default) |
|
48-port
10/100 Multi-Layer Stackable Managed Switch
with (2) SFP Combo ports
Introducing MILAN’s new low-cost,
stackable, Fast Ethernet switch that delivers maximum throughput
and flexibility where you need it — to high-density
workgroups at the edge of the network, or in the backbone
of small networks. The MIL-SM4804G is a managed 48-port switch
with auto-sensing 10/100 ports, two 10/100/1000 Combo SFP
ports, and two 10/100/1000 ports for stacking management.
The two Combo SFP ports enables fiber connectivity through
two hot-swappable Small Form-factor Pluggable (SFP) gigabit
interfaces. The non-blocking design of the switch delivers
simultaneous, full wire-speed, low-latency throughput to all
ports. In addition, the 1U rack-mount form factor uses less
rack space and provides a lower per-port cost than comparable
Fast Ethernet switches.
Robust Security
Robust security features include IEEE 802.1x port-based authentication
and access control lists, ensuring that only authorized users
can access your network. Secure management of the switches
is available through Secure Sockets Layer (SSL) for the Web
GUI and Secured Shell (SSHv2) and TACACS+ for command-line
or Telnet sessions. Additionally, up to 8 MIL-SM4804G switches
can be stacked and securely managed via a single IP address.
For enterprise or workgroup deployments in cost-sensitive
organizations, the flexibility of stacking and additional
Gigabit capability, MiLAN’s MIL-SM4804G Multi-Layer
Stackable management switch delivers the ideal network edge-access
solution.
Multi-Layer Protocol Support
In edge network environments, wire-speed performance with
full QoS control for all interfaces is critical. The MIL-SM4804G
supports up to L2/L3/L4 Traffic Classification/Priority Management
where network traffic can be shaped based on IP/TCP/UDP/MAC
Addresses. The included 4 Gigabit Ethernet combo interfaces
provide unprecedented flexibility, whether you are stacking
between switches, attaching bandwidth-thirsty file servers,
or aggregating critical data to the core of your network using
copper or fiber connections.
Simplified Network Management
Simplify and reduce IT staff workload and mean time-to-repair
with intuitive, GUI-based device configuration, and an industry-standard
command-line interface (CLI). New front-panel stacking capabilities
allow you to build a single-IP manageable device with up to
eight switches utilizing standard copper Gigabit Ethernet
interfaces.
Outstanding Value
With the high-value price point, flexible design, and reduced
maintenance requirements, MiLAN’s new MIL-SM4804G Multi-Layer
Stackable management switch solution reduces Total Cost of
Ownership, yields a high return on investment, and is ideal
for delivering highly reliable, converged voice, video, and
data services over a single network infrastructure.
Features
• Graphical User Interface
• Command Line Interface
• Port Status
• Port Statistics
• Port Controls
• Link Aggregation
• VLAN Configuration
• Spanning Tree
• IGMP
• Port Mirroring
• Remote Management
• Security
• Jumbo Frame
• Quality of Service (QoS)
• Bandwidth Control
• IP Stacking |
Product
Number
22) MIL-SM4804G
|
Port
One
(48) 10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
|
Port
Two
(2) SFP/RJ-45 Combo Port
(SFP Default) |
 |
8-port
10/100/1000 Advanced Layer 2 Managed Switch
with (2) SFP Combo ports; for Indoor or Protected Outdoor
The MIL-SM8002TG series delivers superior
management features that include port based, dynamic and static
VLANs, 802.1Q VLAN tagging, GVRP with MVR, IGMP, port mirroring,
port security.
Security includes static addressing, filtering and blocking
of packets to identified MAC addresses. Four priority queues
per port insure minimum delay for voice over IP or multimedia
network data. A console port provides local management while
Telnet SNMP and Web-based management are provided via any
network device. Non-blocking 18Gbps architecture assures rapid
packet delivery while 8,000 MAC address table provides swift
lookup and packet forwarding. Other features that enhance
performance are included such as 802.1d/w spanning tree and
Rapid Spanning Tree, 802.3x flow control, 802.1ad link aggregation
and broadcast storm control.
Features
• 10/100/1000 Mbs Auto-Negotiation
• AutoCross™
• 2 Combo SFP Ports
• Management
• 802.1X Authentication
• RADIUS/TACACS+
• MAC Address Security
• Firmware update
• System default
• VLANs
• IGMP
• Quality of Service
• Class of Service
• Spanning Tree
• Bandwidth Allocation
• Port Trunk
• Port Mirroring
• Broadcast storm filter
• DHCP Client, Relay, Server
• SNTP and SMTP support |
Product
Number
23) MIL-SM8002TG
|
Port
One
(9) 10/100/1000BASE-T
(RJ-45) [100 m/328 ft.]
|
Port
Two
(2) SFP/RJ-45 Combo Port
(SFP Default) |
 |
24-port
10/100/1000 Multi - Layer Managed Switch
with (4) SFP Combo ports
The MILAN Multi-Layer Gigabit Ethernet
switch delivers maximum throughput and flexibility where you
need it — to high-density workgroups at the edge of
the network, or in the backbone of small networks.
The MIL-SM24004TG is a managed 24-port Gigabit Ethernet switch
with auto-sensing 10/100/1000 ports plus four Combo Small-Form-Pluggable
(SFP) ports. The Combo SFP ports enables fiber connectivity
through four hotswappable Small Form-factor Pluggable gigabit
interfaces. The MIL-SM24004TG offers high performance at an
attractive price. It supports L2/L4 Gigabit Switching performance
and eliminates network bottlenecks with wire-speed switching
fabric. It also offers feature rich software to manage and
secure the entire network communication. In addition, the
1U rack-mount form factor uses less rack space and provides
a lower perport cost than comparable Gigabit Ethernet switches.
Robust Security
Robust security features include IEEE 802.1x port-based authentication
and access control lists, ensuring that only authorized users
can access your network. Secure management of the switches
is available through Secure Sockets Layer (SSL) for the Web
GUI and Secured Shell(SSHv2) and TACACS+ for command-line
or Telnet sessions. For enterprise or workgroup deployments
in cost-sensitive organizations, the flexibility mixing copper/fiber
connectivity and Gigabit capability, the MIL-SM24004TG Gigabit
Ethernet Multi-Layer management switch delivers the ideal
network core solution.
Multi-Layer Protocol Support
In core network environments, wire-speed performance with
full QoS control for all interfaces is critical. The MIL-SM24004TG
supports up to L2/L3/L4 Traffic Classification/Priority Management
where network traffic can be shaped based on IP/TCP/UDP/MAC
Addresses. The included 4 Gigabit Ethernet combo interfaces
provide unprecedented flexibility, whether you are converging
copper and fiber networks, attaching bandwidth-thirsty file
servers, or aggregating critical data to the core of your
network.
Simplified Network Management
Simplify and reduce IT staff workload and mean time-to-repair
with intuitive, GUI-based device configuration, and an industry-standard
command-line interface (CLI).
Outstanding Value
With the high-value price point, flexible design, and reduced
maintenance requirements, the MIL-SM24004TG Gigabit Ethernet
Multi-Layer management switch solution reduces Total Cost
of Ownership, yields a high return on investment, and is ideal
for delivering highly reliable, converged voice, video, and
data services over a single network infrastructure.
Features
• Graphical User Interface
• Command Line Interface
• Front Panel
• Port Status
• Port Statistics
• Port Controls
• Link Aggregation
• VLAN Configuration
• Spanning Tree
• IGMP
• Port Mirroring
• Remote Managemen
• Security
• Jumbo Frame
• Quality of Service (QoS)
• Bandwidth Control
• Remote Firmware Upgrade and Remote
Configuration Storage upload
• Editable configuration file
• System Log
• SNTP Clock Synchronization
• DNS Server |
Product
Number
24) MIL-SM24004TG |
Port
One
(24) 10/100/1000BASE-T
(RJ-45) [100 m/328 ft.] |
Port
Two
(4) SFP/RJ-45 Combo Port
(SFP Default) |
For
additional information, options and pricing about our ThinkCP™
products, please contact our sales representatives - (800)726-2477
or
email - SalesDesk AT ThinkCP.com
Copyright © 1997 - 2008 H. Co. Computer Products. All Rights Reserved.
ThinkCP™ and H. Co. Computer Products™ are trademarks
or registered trademarks of H. Co. Computer Products, Inc. For additional
information regarding our trademarks, please visit Trademark Info
at http://www.ThinkCP.com. This list is not intended to be an all-inclusive
or comprehensive list of all H. Co. Computer Products trademarks
and/or intellectual properties. Other product names used herein
are for identification purposes only and may be the respective property
or trademarks of other companies.
 |
|
