 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
Think Side Menu
 |
 |
Think Side Menu
 |
|
 |
SuperServer
6025W-URB |
|
 |
Key
Features
• Dual Intel® 64-bit Xeon® Quad-Core or
Dual-Core, with 1600 / 1333 / 1066 MHz
FSB
•
Up to 64GB DDR2 800 / 667 / 533
SDRAM Fully Buffered DIMM (FB-DIMM)
•
1 Universal I/O (UIO) Slot,
3 (x8) Full-height/length PCI-E,
2 (x8) Low-Profile PCI-E Slots
•
Intel® 82575EB Dual-port
Gigabit Ethernet Controller
•
8 x 3.5" Hot-swap Drives Trays
6x SATA Hard Drives Supported
•
700W High-efficiency Redundant
Power Supply
Specifications
• SYS-6025W-URB – SuperServer 6025W-URB (Black))
• Super X7DWN
CPU
• Dual 771-pin
LGA Sockets
• Supports up to Dual Intel® 64-bit
Xeon®processor(s) of the same type below:
•
Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence
(Harpertown/Clovertown processor) up to 3.20 GHz
•
Dual-Core Intel®
Xeon®Processor
5200/5100LV
sequence
(Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus
• 1600 / 1333 / 1066 MHz system bus
Memory Capacity
• Eight 240-pin DIMM sockets
• Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM
memory
• Dual branch memory bus
• Memory must be populated in pairs
• Memory Sparing supported
Memory Type
• 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM)
ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
• 256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
Memory Voltage
• 1.8 V or 1.5 V
Error Detection
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction
(SDDC)
Chipset
• Intel® 5400 (Seaburg) chipset
• MCH + ESB2
SATA
• Intel ESB2 SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support (Windows only)
• RAID 0, 1, 10 support (Linux)
IPMI
• Support for Intelligent Platform Management Interface
v.2.0 / 1.5
• 200-pin IPMI slot (SIMSO(+))
• (Optional: AOC-SIMSO(+))
• For Dedicated LAN, cable CBL-0177L must be used (cable
sold separately)
Network Controllers
• Intel® 82575 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
output
• Intel® I/OAT support for fast, scaleable, and reliable
networking
Graphics
• ATI ES1000 controller with 32 MB of video memory
Super I/O
• Winbond 83627HG chip
Clock Generator
• ICS 401 chip
Serial ATA
• Six Serial ATA ports
• Six SATA hard drives supported
IDE
• Single EIDE channel supports up to two UDMA IDE devices
(IDE-M, IDE-S)
including CF(Compact Flash) Card
• Compact Flash (40-pin connector, IDE 1, single channel)
slot
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
• 1 Floppy controller; 1.44 MB
LAN
• 2x RJ45 LAN ports
USB
• 2x USB rear ports
• 3x USB internal headers
• Total 5 USB 2.0 Compliant / 1.1 Compliant
VGA
• 1x VGA Port
Keyboard / Mouse
• PS/2 keyboard and mouse ports
Serial Port / Header
• 1 Fast UART 16550 serial port
• 1 Fast
UART 16550 serial header
BIOS Type
• 16Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
• Plug and Play (PnP)
• DMI 2.3
• PCI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
Form Factor
• 2U Rackmount
Model
• SC825TQ-R700U
Height
3.5" (89mm)
Width
17.2" (437mm)
Depth
25.5" (648mm)
Gross Weight
55 lbs (24.9kg)
Available Colors
Silver, Black
Buttons
• Power On/Off button
• System Reset button
LEDs
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
• Power fail LED
Ports
•
2x USB Ports + DB9 COM Port (optional)
Left Side
• 1 Universal I/O (UIO) Slot
• 3 (x8) PCI-E Slots (Full-height / Full-length)
Right Side
• 2 (x8) PCI-E Slots (Low-Profile)
Hot-swap
• 8x 3.5"SATA Hot-swap drive trays
• Supports up to 6x SATA hard drives
DVD-ROM
•
Slim 8x DVD, 24x CD, DVD-ROM Drive
Floppy
•
Slim 1.44MB Floppy Drive (Optional)
•
1x 2U SAS / SATA backplane
Fans
• 3x 80mm 6300 RPM fans
Shroud
• 1x Air Shroud
700W (1 + 1) Redundant AC-DC high-efficiency power supply w/
PFC
AC Voltage
• 100 - 240V, 60-50Hz, 10 - 4 Amp
+5V standby
• 4 Amp
+12V
• 57 Amp
+5V
• 30 Amp
+3.3V
• 24 Amp
-12V
• 0.6 Amp
CPU
• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V,
+3.3V Standby,
+5V Standby, VBAT, HT, Memory, Chipset Voltages.
• 6 Phase-switching voltage regulator with auto-sense
from 0.8375V-1.60V
FAN
• Total of eight 4-pin fan headers supporting up to 8
fans
• 8x fans with tachometer status monitoring
• Status monitor for speed control
• Support 3-pin fans (w/o speed control)
• Pulse Width Modulated (PWM) fan connectors
Temperature
• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x fan connectors
• PC temperture sensing logic
• Thermal Monitor 2 (TM2) support
• PECI
LED
• CPU / System Overheat LED
• UID / Remote UID
Other Features
• Chassis intrusion detection
• Chassis intrusion header
• SDDC Support
| Operating
Environment / Compliance |
RoHS
•
RoHS Compliant 5/6, Server Exemption
Environmental Spec.
• Operating Temperature: 10° to 35°C (50°
to 95°F)
• Non-operating Temperature: -40° to 70°C (-40°
to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
For additional information, options and pricing about our ThinkCP™ products,
please contact our sales representatives - (800)726-2477
or
email - SalesDesk
AT ThinkCP.com
Copyright © 1997 - 2012 H. Co. Computer Products. All Rights Reserved. ThinkCP™
and H. Co. Computer Products® are trademarks or registered trademarks of H.
Co. Computer Products, Inc. For additional information regarding our trademarks,
please visit Trademark Info at http://www.ThinkCP.com. This list is not intended
to be an all-inclusive or comprehensive list of all H. Co. Computer Products trademarks
and/or intellectual properties. Other product names used herein are for identification
purposes only and may be the respective property or trademarks of other companies.
 |
|
|
