|  ViPoRSS-8U  |  ViPoRSS-5U  |

ThinkTank I-2U SuperServer Featuring Dual Intel 64-bit Xeon® Processors

Motherboard Features
• Dual Intel® 64-bit Xeon® Dual-Core, 667 / 1066 / 1333 MHz FSB
• Intel® 5000X (Greencreek) Chipset
• Up to 32GB 667/533MHz DDR2 ECC FB-DIMM (Fully Buffered DIMM)
• Intel® (ESB2/Gilgal) 82563 Dual-port Gigabit Ethernet Controller
• Adaptec AIC-7902 Dual Channel Ultra320 SCSI with Host RAID 0, 1, 10 Support
• 6x SATAII Ports via ESB2 Controller
• 1 (x16) & 1 (x4 in x16) PCI-Express, 2x 64-bit 133/100MHz PCI-X,
  1x 64-bit 100MHz PCI-X, 1x 32-bit PCI 33MHz
• Zero-Channel RAID Support
• Low Profile IPMI 2.0 (SIMLP) Slot


Chassis Features
• Redundant 500W Power Supply
• 6 x 1" Hot-swap SAS / SATA Drive Bays
• 1 x 5.25" Peripheral Drive Bay
• 4. 1 x Slim CD-ROM Drive
• 1 x 3.5" Floppy Drive
• 4 x 80mm 6300 RPM Fan
• 3 x Full-size, Full-length I/O Expansion Slot
• Power Switch & 6 LED Indicators
*Please Note: Full SES2 Support is only available on SAS motherboards




Chassis Specifications

Form Factor 2U chassis support for max. motherboard size - 12" x 13" E-ATX Processor Support Dual Xeon® or 64-bit Xeon® Processors Dimensions Height 3.5" (89mm) Width 16.8" (426mm) Depth 25.6" (650mm) Gross Weight 53 lbs (24.0kg) Available Colors Beige, Black Expansion Slots • Capacity for 3x full-height length expansion slots Drive Bays Hot-swap 6x 1" SAS / SATA Hot-swap drive trays Peripheral Bay(s) 1x 5.25" full-height peripheral bay SAS / SATA Backplane 1x 2U SAS / SATA Backplane Peripheral Drives CD-ROM TEAC Slim 24x CDROM Drive Floppy Panasonic 3.5" 1.44MB Floppy Drive Front Panel Buttons • Power On/Off button • System Reset button LEDs • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power fail LED Ports 2x USB Ports (optional)

System Cooling Fans 4x 80mm 6300 RPM fans System Monitoring Chassis intrusion switch Operating Environment (System) Operating Temperature Range • 10 - 35°C (50° - 95°F) Non-Operating Temperature Range • -40 - 70°C (-40° - 158°F) Humidity Range • 8 - 90% non-condensing Non-Operating Humidity Range • 5 - 95% non-condensing Power Supply Redundant 2U 500W AC power supplwith PFC [ 24-pin, (8-pin, 4-pin)=12V) ] AC Voltage • 100 - 240V, 50/ 60Hz, 10 Amp DC Output • 5V + 3.3V ≤ 160W • 12V Total ≤ 39 Amp +5V                    30.0 amp +5V standby       2.0 amp +12V1                15.0 amp +12V2                15.0 amp +12V3                18.0 amp -12V                   1.0 amp +3.3V                 21.0 amp Regulatory (Power Supply) Power Supply Safety / EMC • USA - UL listed, FCC • Canada - CUL listed • Germany - TUV Certified • Europe/CE Mark • EN 60950/IEC 60950-Compliant

Motherboard Specifications

Physical Stats Form Factor • Extended ATX Dimensions • 12" x 13.05" (30.5cm x 33.2cm) Processor/Cache CPU • Dual 771-pin LGA Sockets • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:         - Dual-Core Intel® Xeon®           Processor 5100/5000           sequence (Woodcrest           /Dempsey processor)           with 2MB L2 Integrated           Advanced Transfer Cache           per core, 4MB L2 cache           total, up to 3.73 GHz         - NOTE: Motherboard PCB           revision 2.0 or above is           required to support           Xeon® 5100 (Woodcrest)           processors System Bus • 1333 MHz, 1066 & 667 MHz system bus Operating System Software • Supports 64-bit Operating Systems • Supports 32-bit Operating Systems System Memory Memory Capacity • Eight 240-pin DIMM sockets • Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory • Dual branch memory bus • Memory must be populated in pairs • Memory Mirroring supported Memory Type • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes • 512 MB, 1GB, 2GB, 4GB Memory Voltage • 1.8 V only • 1.5V(AMB) Error Detection • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 and x8 Single Device Data Correction (SDDC) On-Board Devices Chipset • Intel® 5000X (GreenCreek) chipset • MCH + PXH-V + ESB2 SATA • Intel ESB2 SATAII Controller • RAID 0, 1, 5, 10 support RAID • Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-LPZCR1 or AOC-LPZCR2 • SCSI RAID 0, 1, 5, 10 • Optional: (Card NOT included) IPMI • Support for Intelligent Platform Management Interface v.2.0 • 200-pin IPMI slot (SIMLP) • (Optional: AOC-SIMLP-B) • (Optional: AOC-SIMLP-3) with 3rd LAN support • NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot Network Controllers • Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Intel® I/OAT support for fast, scaleable, and reliable networking Super I/O • Winbond 83627HF chip Clock Generator • CK410B chip Input / Output Serial ATA • Six Serial ATA ports • Six SATA hard drives supported IDE • Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card

• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 • Compact Flash (40-pin connector, IDE 1, single channel) slot Floppy • 1 Floppy controller; 1.44 MB, 2.88 MB LAN • 2x RJ45 LAN ports USB • 4x USB rear ports • 1x USB internal header • 6 total USB ports, 2.0 Compliant / 1.1 Compliant Audio • AC97 Audio Keyboard / Mouse • PS/2 keyboard and mouse ports Serial Port / Header • 1 Fast UART 16550 serial port • 1 Fast UART 16550 serial header Parallel Port • 1 ECP / EEP parallel port Expansion Slots PCI-Express • 1 (x16) PCI-e slot • 1 (x4) PCI-e (using x16) slot PCI-X • 2x 64-bit 133/100MHz PCI-X (3.3V) slots • 1x 64-bit 100MHz PCI-X (3.3V) slot PCI • 1x 32-bit 33MHz PCI (5V) slot System BIOS BIOS Type • 8Mb Flash EEPROM with Phoenix® BIOS BIOS Features • Plug and Play (PnP) • SMBIOS 2.3 • DMI 2.1 • PCI 2.2 • ACPI 1.0 • PCI-X 1.0 • USB Keyboard support • Hardware BIOS Virus protection Management Software • Optional IPMI (Intelligent Platform Management Interface) v2.0 • Super Doctor III • Watch Dog • NMI Power Configurations • ACPI Power Management • Wake-On-Ring (WOR) header • Wake-On-LAN (WOL) header • Power-on mode for AC power recovery • Internal/External modem remote ring-on PC Health Monitoring CPU • Monitors for CPU Cores, +1.8V, +3.3V, +5V, -12V & +5V Standby, VBAT • CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V FAN • Total of eight 4-pin fans • 8x fans with status monitoring • Status monitor for speed control • Support 3-pin fans • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors Temperature • Monitoring for CPU and chassis, environment • CPU thermal trip support • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support LED • CPU / System Overheat LED Other Features • Chassis intrusion detection • Chassis intrusion header Operating Environment / Compliance RoHS • RoHS Compliant 6/6, Pb Free Environmental Spec. • Operating Temperature: 10º to 35º C (50º to 95º F) • Non-operating Temperature: -40º to 70º (-40º to 158º F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5 to 95% (non-condensing)

For additional information, options and pricing about our ThinkCP™ products, please contact our sales representatives - (800)726-2477 or email - SalesDesk AT ThinkCP.com Copyright © 1997 - 2011 H. Co. Computer Products. All Rights Reserved. ThinkCP™ and H. Co. Computer Products® are trademarks or registered trademarks of H. Co. Computer Products, Inc. For additional information regarding our trademarks, please visit Trademark Info at http://www.ThinkCP.com. This list is not intended to be an all-inclusive or comprehensive list of all H. Co. Computer Products trademarks and/or intellectual properties. Other product names used herein are for identification purposes only and may be the respective property or trademarks of other companies.