Think Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side MenuThink Side Menu


|  ViPoR iSCSI XL Storage System  |  ViPoRSS-8U  |  ViPoRSS-5U  | ViPoR SSR-212  |



ViPoR™ SS-8U


The ViPoR™ SS-8U is a highly flexible, and configurable storage solution designed to support enterprise storage requirements. ThinkCP™ Representatives can help adapt and optimize your configuration for RAID, NAS, NAS-RAID, disk-to-disk backup, iSCSI target or other possibilities contingent on your environment and specific requirements.


All NAS configurations incorporate Open-E NAS software.


 Download PDF



Chassis Specifications


Dimensions:
• 14" (H) x 19" (W) x 29" (D)
No. of Hard Drive:
• Supports up to 50 hot-swappable HDDs
  (SCSI, SATA ll 3Gb/s or SAS interface )
Power Support:
• Up to 3000W redundant power suppply (2 X 1500W)
Ventilation:
• 8 hot-swappable fans (80mm x 80mm x 25mm )
Environment:
• Ambient Temperature:
• Operating: +5°C to +35°C
• Non-operating: -40°C to +70°C
• Relative Humidity:
• Non-operating: 95% at +30°C
• Non-condensing


Motherboard Specifications


Physical Stats:


Form Factor
• Extended ATX

Dimensions
• 12" x 13.05" (30.5cm x 33.2cm)
Processor/Chipset:



CPU
• Dual 1207-pin Socket F
• Supports up to two Six-Core AMD Opteron™
   2000 Series processors

Chipset

• HT3.0 Link support
• nVIDIA MCP55Pro
• nVIDIA IO55
On-Board Devices:
Clock Generator
• nVIDIA MCP55Pro

SAS
• LSI SAS1068E*
• RAID 0, 1, 10 support
• (Optional: AOC-IButton68) RAID 5 support

SATA
• nVidia MCP55 Pro SATA2 3.0Gbps Controller
• 6 SATA Ports
• nVidia RAID 2.0
• SATA RAID 0, 1, 0+1, 5, JBOD Support

IPMI
• Support for Intelligent Platform Management /
  Interface v.2.0
• 200-pin IPMI slot (SIMLP)
• (Optional: AOC-SIMLP-B(+) R 3.00)
• (Optional: AOC-SIMLP-3(+) R 3.00) with
  3rd LAN support
• (KVM over LAN not support)
• RMM (Remote Management Module)
• (Card not included)
• For Dedicated LAN, cable CBL-0177L must be
  used (cable sold separately)

Network Controllers
• nVidia MCP55 Pro Chipset Dual-port LAN /
  Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and
  1000BASE-T, RJ45 output

Super I/O
• Winbond 83627HG

Audio
• HD Audio ALC883
Input / Output:
SAS
• Eight SAS / SATA (internal) ports
• Up to 8 SAS / SATA hard drives supported

SATA
• 6 SATA2 ports

IDE
• Single EIDE channel support up to two
  UDMA IDE devices
• Supports UDMA Mode 5
• Supports PIO Mode 4
• Supports ATA 100/133

Floppy
• 1 Floppy port; 1.44 MB support

LAN
• 2 RJ45 LAN ports

USB
• FUCI
• Up to 8 USB Ports 2.0 Compliant, 1.1 Compliant
• 4 Rear Ports
• 4 Internal Headers

Keyboard / Mouse
• PS/2 keyboard and mouse ports

Serial Ports
• 2 Fast UART 16550 serial ports
• 2 Headers

Parallel Port
• 1 ECP / EPP parallel port

Audio
• 1 Line In / Line Out / Microphone port
Expansion Slots:
PCI-Express
• 2 x16 PCI-e Slots (nVidia SLI Technology Supported)
• 1 x8 PCI-e (using x16 slot)
• 2 x4 PCI-e (using x8 slot)

PCI-X
• 1 32-bit PCI slot
System BIOS:
BIOS Type
• 8Mb Flash EEPROM with AMI® BIOS

BIOS Features
• Plug and Play (PnP)
• DMI 2.3
• PCI 2.2
• ACPI 2.0
• USB Keyboard Support
• SMBIOS 2.3
Management:
Software
• Optional IPMI
  (Intelligent Platform Management Interface) 2.0
• Super Doctor III
• Watch Dog

Power Configurations
• ACPI Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Keyboard Wakeup from Soft-Off
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on
• Suspend to RAM (STR)
PC Health Monitoring:
CPU
• Monitors CPU Core Voltages, +3.3V, +5V,
  +12V, 5V Standby, VBAT
• CPU switching voltage regulator

FAN
• Total up to 8-fan status tachometer monitoring
• Up to eight 4-pin fan headers
• Status monitor for speed control
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature
• Monitoring for CPU and chassis environment
• CPU Thermal Trip Support
• PC temperature sensing logic

LED
• CPU / System Overheat LED
• +5 Standby Alert LED

Other
• Chassis Intrusion Detection

Features
• Chassis Intrusion Header
• Chipkill Support
Operating Environment/ Compliance:
RoHS
• RoHS Compliant 6/6, Pb Free

Environmental Specifications
• Operating Temperature: 10°C to 35°C
  (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C
  (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90%
  (non-condensing)
• Non-operating Relative Humidity: 5% to 95%
  (non-condensing)
Regulatory
FCC
• Class B



For additional information, options and pricing about our ThinkCP™ products, please contact our sales representatives -
(800)726-2477 or email - SalesDesk AT ThinkCP.com



Copyright © 1997 - 2012 H. Co. Computer Products. All Rights Reserved. ThinkCP™ and H. Co. Computer Products® are trademarks or registered trademarks of H. Co. Computer Products, Inc. For additional information regarding our trademarks, please visit Trademark Info at http://www.ThinkCP.com. This list is not intended to be an all-inclusive or comprehensive list of all H. Co. Computer Products trademarks and/or intellectual properties. Other product names used herein are for identification purposes only and may be the respective property or trademarks of other companies.